top of page
Yemlİk Sİstemlerİ
Kümes işletmeciliğinde kârlılığın anahtarı, en büyük maliyet kalemi olan yemi en verimli şekilde kullanmaktır. Efe Tavukçuluk olarak, tam da bu amaç için geliştirdiğimiz modern ve otomatik yemlik sistemleri ile işletmenize değer katıyoruz.
EFE FEEDER MODEL 7 FS-701
14 separate compartments. The bottom cover system provides automatic feeding during the chick stage, offering a practical solution, saving time and money. Feeding area height from the ground is 60mm.
EFE PAN FEEDER MODEL 6 FS-601
12 separate compartments. Easy and quick installation. Feeding area height from the ground is 60mm.
Feed Pipe With Ridge FS-501
1.2 mm thickness. 275 g/m² galvanized coating. Ridge height 11 mm.
FEED AUGER FS-504
Outer diameter 36 mm, inner shaft diameter 20 mm, 4 mm thickness, 52 mm pitch.
Feed Pipe Connection FS-503
1.2mm thickness. Easy to assemble. Width 142 mm.
Feeder Fixing FS-801
In round tubes, it prevents the feeder plate from rotating.
Bearing Shaft FS-401
It is equipped with a tapered roller shaft and a screw clamping plate.
Feed Bunker 75kg FS-201
It has a capacity of 75 kg, a 1 mm thick boiler, a 2 mm thick boiler base, and is hinged for easy installation.
Feeder End Engine Support FS-301
2mm frame and legs. Legs are height adjustable.
Feed Bunker Flansh Bearing Pipe Tube FS-408
A tapered roller bearing ring is mounted inside the solid pipe.
Feed Bunker Flansh With Ridge FS-406
Flange that can be mounted on the feed hopper and end of the feeder line.
Feed Bunker Flansh Grease Fitting FS-410
The feed hopper bearing area is protected from feed and dust after being pressed.
Auger Pressure Sheet FS-403
Auger Pressure Sheet
Feeder and Drinker Support FS-804
The chick feeder has a suitable inner diameter of 280mm, with a height of 30mm at level 1 and 65mm at level 2.
Chick Feeder FS-802
Capacity approximately 4.8kg, outer diameter 270mm, feeder is 35mm above the ground.
FEEDER STOPPER SWITCH FS-411
FEEDER STOPPER SWITCH
FEED STOP SENSOR FS-412
Sensitive and durable capacitive sensor, 30mm outer diameter.
0.75 Kw 300 d/d REDUCTOR MOTOR FS-102
0.75kw 300 rpm geared motor, 20mm shaft diameter, suitable for feed and silo systems.
0.5 kW 300 rpm GEARBOX MOTOR FS-101
0.55kw 300 rpm geared motor, 20mm shaft diameter, suitable for feed and silo systems.
Feed Motor Gearbox FS-106
Feed reducer shaft diameter 20mm, 300 rpm
Ceiling Type Small Winch LS-403
Capacity 680kg
Large Hand Winch LS-03
Capacity 1.000 kg
Ceiling Type Winch LS-104
Capacity 1,500-2,000 kg
Lifting Reductor Engine LS-106
4 rpm with 1.1kw and 0.75kw options.
Lifting Reductor Engine LS-108
4 rpm with 1.1kw and 0.75kw options.
bottom of page